Shanghai Sunland Industrial Co., Ltd is the top manufacturer of Personal Protect Equipment in China, with 20 years’experience. We are the Chinese government appointed manufacturer for government power,personal protection equipment , medical instruments,construction industry, etc. All the products get the CE, ANSI and related Industry Certificates. All our safety helmets use the top-quality raw material without any recycling material.
Stall safety helmet
We provide exclusive customization of the products logo, using advanced printing technology and technology, not suitable for fading, solid and firm, scratch-proof and anti-smashing, and suitable for various scenes such as construction, mining, warehouse, inspection, etc. Our goal is to satisfy your needs. Demand, do your best.
Professional team work and production line which can make nice quality in short time.
The professional team provides 24 * 7 after-sales service for you, which can help you solve any problems
29/3/2019, · Choose ,a helmet, that is comfortable enough to be worn for your entire ride. If you do not ,wear, the ,helmet,, it will not protect you. Check the chin straps to ensure they can be tightened enough to hold the ,helmet, securely without digging into your chin or face. Make sure the head bands and/or padding are comfortable.
helmet wear. The following schedule is recommended. It is important to observe this schedule as closely as possible. Wear the helmet two hours on and two hours off. The helmet is not to be applied at night. Day 1: Apply the helmet for naps. When the helmet is removed, check your baby's head for areas of redness which do not go away after 30 minutes.
When properly positioned, the helmet should be worn low on the brow, eyes near the center of the eye opening, touching the top of the head with uniform and firm pressure all around – tight without excessive pressure points. See illustration 3. Illustration 3
• Tighten the four-point chin strap to see how the helmet and pads fit. • The ACH is snug but not too tight. • The crown pad touches the top of the head. • Look up with your eyes only. You should just see the rim of the ACH. If you can’t see the rim, the helmet sits too high. • …
Remember, too, that a helmet loosens up a bit as the comfort liner compresses through use. A new helmet should be as tight as you can comfortably wear it. Now, with the chin strap still securely fastened and your head straight, try rolling the helmet forward off your head. You shouldn't be able to pull it off.
Ask for ,a helmet instruction, card along with the ,helmet,. Read it carefully ; Buy ,a helmet, lock. If you do not wish to carry your ,helmet, around, you can lock it to your motorcycle ; Busting ,helmet, myths You might be under the impression that ,helmets, not only seize the feeling of freedom that riding a bike gives but also hold you back.
A helmet works in three ways: It reduces the deceleration of the skull, and hence the brain movement, by manag- ing the impact. The soft material incorporated in the helmet absorbs some of the impact and therefore the head comes to a halt more slowly. This means that …
Strict ,instructions, were given to the security personnel not to allow any two wheeler driver to enter the factory without ,helmet,. A worker without ,helmet, can enter the factory only after paying a fine of Rs.10/- on first day and it is compounding till the 5th day. His name will be entered in a register for monitoring.
3/2/2020, · The helmet should be at the same level at the front and back of his head. The space between the front of the helmet and your child's eyebrows should equal the width of 1 to 2 fingers. Your child should be able to see the rim of his helmet when he looks up. Fix the straps so they form a …
Grasp the helmet by the chin straps, with the front of the helmet towards you and the top of the helmet facing down; Place the thumbs on the inside surface of the straps and balance the helmet with the index fingers; Spread the helmet apart with the hands and slip down over the head; See Illustration 2.